Your position: Home / Module / Relay Module

Keyestudio Single One Channel Solid State Relay Module FOR arduino

KS0263
Price:
Wholesale:
5+
$5.61
    Please select the information you wantX
Quantity:
-
+
(966 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(27)

KS0263 (1)KS0263 (2)KS0263 (3)KS0263 (4)KS0263 (5)KS0263 (6)

 

 

 

 

 

 

Introduction

Single-phase solid state relay is a low-level active solid state relay, that is, when the input control signal is low (0-1.5V), the relay ON; when the input control signal is high (3-5V) Relay OFF.
Solid state relay is a kind of a new non-contact switch device which is composed of solid electronic components. Compared with the electromagnetic relay, it is more reliable, and no contact, long life, fast, less interference to the outside world.

Note:

Keyestudio single One Channel Solid State Relay output control terminal to be connected to the circuit  and  the working current needs to be greater than 50mA,solid state relay can be properly disconnected.

Performance Parameters

Voltage  quiescent current     working current       trigger voltage            trigger current
   5V                 0mA                      12.5mA                   0-1.5V                        2mA

output port:AC240V/2A 


       Connection Diagram      

000000000000

Sample Codes

 int Relay = 3;

  void setup()

{

  pinMode(Relay, OUTPUT);     //Set Pin3 as output

}

void loop()

{

          digitalWrite(Relay, HIGH);   //Turn off relay

          delay(1000);

          digitalWrite(Relay, LOW);    //Turn on relay

          delay(1000);

}

 

Result

Complete the wiring as shown above, and then turn on the power, disconnecting the solid state relay 1S and then connecting 1S, cycle alternately.

 

Average rating: 4.0 based on 27 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login