Your position: Home / 3D printer / CNC Series

Keyestudio CNC Shield V4.0 Board For Arduino Nano

KS0152
Price:
Wholesale:
5+
$6.64
    Please select the information you wantX
Quantity:
-
+
(225 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(40)

 

KS0152  3D KS0152  3D V4 (1)

KS0152  3D   V4  (3)

KS0152  3D KS0152  3D V4 (2)KS0152  3D KS0152  3D V4 (7)KS0152  3D KS0152  3D V4 (5)KS0152  3D KS0152  3D V4 (4)

Noted:

This product is defaulted full step mode, please modify it to 1/16 mode or any other mode by yourself if you need.

 

A. Corresponding interfaces of official web is shown as below:

#define X_STEP_BIT         2  // Uno Digital Pin 2

#define Y_STEP_BIT         3  // Uno Digital Pin 3

#define Z_STEP_BIT         4  // Uno Digital Pin 4

#define X_DIRECTION_BIT    5  // Uno Digital Pin 5

#define Y_DIRECTION_BIT    6  // Uno Digital Pin 6

#define Z_DIRECTION_BIT    7  // Uno Digital Pin 7

B.The product is equipped with A4988 driver module. If you want to change working mode, just need to adjust the level of ms1 ms2 ms3(DRV 8825 ms0 ms1 ms2) that have been connected to three pairs of pin header(with jumper cap). If plugging a jumper cap, the circuit is connected to GND. Namely, ms1 ms2 ms3(DRV 8825 ms0 ms1 ms2) are connected to GND, meaning the working mode has changed into full-step mode. The circuit is disconnected without jumper cap. If you want to connect the circuit with high level, you have to connect it to VCC by soldering.

 The relation between working mode of A4988 module and MS1, MS2, MS3 is shown as below table:

123

The relation between working mode of DRV 8825 module and MS0, MS1, MS2 is shown as below table:

23

 

 

Average rating: 4.0 based on 40 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login