How to assemble a 4x4x4 RGB CUBE?
-
RGB Cube Kit integrates Arduino programming and multiple sensing technology. This ulra-cool 4x4x4 RGB cube may boosts your inspiration to create various types of light shows.
-
With multiple sensors and modules, like button module, photoresistor, potentiometer and sound sensor, users can learn deeper about the control principle of this RGB Cube, enabling you to design unique light shows. Despite practicing, this product offers an intriguing platform which allows you to design an intellectual lighting system and cultivates the ability to technological innovation and programming.
-
Detailed tutorials and example codes are included in this kit, so that you understand and acquire knowledge in a better way. Beyond that, it improves your hands-on practice and innovation capabilities, cultivates technological innovation awareness and problem-solving abilities.
-
All in all, the entire course is extremely practical and creative, providing us with an excellent opportunity to practice skills and expand our thoughts.
Here are the steps on how to assemble a 4x4x4 RGB CUBE：
Step 1
1.1 Required Components
1.2
There are four holes on the main control board for connecting M3 screws and copper pillars.
1.3
Step 2
2.1 Required Components
2.2
Please pay attention to the direction of the acrylic board. Align the arrowhead to the USB side, as follows:
Fix the board with four M3 screws.
2.3
Step 3
3.1 Required Components
3.2
Plug the little bumps into the square holes on Acrylic Board B:
3.3
3.4
3.5
Hold the screw and tighten it with the screwdriver. Note that do not tighten it too much.
3.6
Step 4
4.1 Required Components
4.2
4.3
Mount the Acrylic Board C:
4.4
4.5
4.6
4.7
Hold the screw and tighten it with the screwdriver. Note that do not tighten it too much.
4.8
Use screws and nuts to fix the Acrylic Board B and C.
Hold the screw and tighten it with the screwdriver. Note that do not tighten it too much.
Step 5
5.1 Required Components
5.2
Moung the Acrylic Board D.
5.3
5.4
5.5
Hold the screw and tighten it with the screwdriver. Note that do not tighten it too much.
5.6
Use screws and nuts to fix the Acrylic Board C and D.
5.7
Step 6
6.1 Required Components
6.2
编号A的亚克力对其，底部亚克力板的编号A
6.3
6.4
Use screws and nuts to fix the Acrylic Board A and B.
6.5
Use screws and nuts to fix the Acrylic Board A and D.
6.6
Step 7
7.1 Required Components
7.2
Please align the holes for screws when installing.
7.3
7.4
7.5
7.6
Completed!
