NEW!Keyestudio EASY plug BMP180 Barometric Pressure Sensor for Arduino STEAM

Note:

This module should be used together with easy-plug control board, the link to the control board is as follows:

http://www.aliexpress.com/store/product/2016-New-Keyestudio-EASY-plug-Main-Control-Board-Controller-for-arduino/1452162_32635551880.html

Introduction

BMP180 is a pressure sensor with high precision, compact design and low power consumption. It can be used in mobile devices. Minimum absolute accuracy reaches 0.03hpa with only 3uA power consumption.

Specification

Interface: Easy plug

Pressure range: 300~1100hPa (Altitude 9000M~-500M)

Supply voltage: 1.8V~3.6V (VDDA), 1.62V~3.6V(VDDD)

Low power consumption: 0.5uA, standard mode

I2C interface 

With temperature output

Leadless, comply with RoHS

MSL 1 response time: 7.5ms

Standby current: 0.1uA

No need for external clock circuit

Connect It Up

Connect the EASY Plug BMP180 sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.