Your position: Home / Module

Free shipping! PCF8591 module AD / DA conversion modules analog-to-digital / digital-to-analog conversion

    Please select the information you wantX
(992 available)
Shipping Cost:
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(28)

MD0222 (2)MD0222 (3)MD0222 (4)MD0222 (5)MD0222 (9)MD0222 (10)MD0222 (6)

Dimensions: 38.5 * 23.5mm
Shipping list:
1.PCF8591 module * 1
2.4PIN female-female DuPont lines * 1
PCF8591 AD / DA chip introduction
     PCF8591 is a monolithic, single supply, low power,8-bit CMOS data acquisition devices. PCF8591 has four analog inputs, one analog output and a serial I2C bus interface. PCF8591 the three address pins A0, A1 and A2 can be used for programming the hardware address, allowing access to eight PCF8591 devices on the same I2C-bus without additional hardware. Input and output on PCF8591 device address, control and data signals are by-wire bidirectional I2C bus serially transmitted.
PCF8591 key performance indicators:
  Single power supply
  PCF8591 operating voltage range of 2.5V-6V
  Low standby current
  Through the I2C bus serial input / output
  PCF8591 by 3 hardware address pins addressing
  PCF8591 I2C bus speed sampling rate decision
  4 analog inputs programmable as single-ended or differential inputs
  Automatic incremental channel selection
  PCF8591 analog voltage range from VSS to VDD
  PCF8591 built-track and hold circuit
  8-bit successive approximation A / D converter
  DAC gain realized by an analog output
  1 module chip PCF8951
  2 module supports four external voltage input capture (voltage input range 0-5v)
  3 module integration photoresistor can collect ambient light intensity by AD exact value
  4 module integrated thermistor, the ambient temperature can be collected by exact numerical AD
  5 module integrates a road 0-5V voltage input capture (via the blue potentiometer to adjust the input voltage)
  6 modules with power indicator (for the module power indicator lights)
  7 modules with output indicator DA, DA output interface voltage when the module reaches a certain value, the DA output indicator will light board, the greater the voltage, the more obvious indicator brightness;
  8 Module PCB size: 3.6cm * 2.3cm
  9 standard dual panel, thickness 1.6mm, nice layout, surrounded by a through-hole, aperture: 3mm, convenient fixed
Module Interface Description
This module left and right, respectively, 2-way pin external expansion interfaces, respectively, as follows:
   DA output interface chip on the left AOUT
        AINO chip analog input interface 0
        AIN1 chip analog input interface 1
        AIN2 chip analog input interface 2
        AIN3 chip analog input interface 3
   Pick the right SCL IIC clock interface microcontroller IO port
        SDA IIC digital interface connected to the microcontroller IO port
        GND module to an external ground
        VCC Power Interface External 3.3v-5v
Red Hat use short-circuit module
   There are three red module shorted cap, respectively role as follows:
   Connect P4 P4 shorted cap, choose the access circuit thermistor
   Connect P5 P5 shorted cap, choose the access circuit photoresistor
   Connect P6 P6 shorted cap, select 0-5V voltage adjustable access circuit
Average rating: 4.0 based on 28 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login