Your position: Home / Sensors

Keyestudio MQ-8 Hydrogen Sensor Detection Module for Arduino

KS0046
Price:
Wholesale:
5+
$3.61
    Please select the information you wantX
Quantity:
-
+
(971 available)
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
  • Description
  • Reviews(27)

 

KS0046 MQ-8KS0046 (3)KS0045  (7)KS0045  (8)KS0046 (6)KS0046 (1)

Introduction
 
The gas sensitive material used in MQ-8 gas sensor is SnO2, which is of lower electrical conductivity in clean air. When there is hydrogen in the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the hydrogen concentration in the air. The change of electrical conductivity can be converted to the output signal corresponding to that of the gas concentration by using a simple circuit. The sensitivity of MQ-8 gas sensor to hydrogen is quite high, it can also detects a variety of other gases containing hydrogen. This sensor, which is suitable for a variety of applications, is definitely a good catch.
 
Feature
  • good sensitivity to hydrogen in a wide range of concentrations.
  • long service life, low cost
  • simple drive circuit
Application
  • household gas leak alarm
  • Industrial-level hydrogen alarm
  • Portable gas detector
Specification
  • Detectable concentration: 100-1000ppm (hydrogen)
  • Loop voltage Vc ≤24V DC
  • Heating voltage VH 5.0V±0.1V AC or DC
  • Load resistance RL adjustable
  • Heating resistance RH 29±3Ω(Room temperature)
  • Heating power: PH ≤900mW
  • Sensitivity S Rs(in air)/Rs(1000ppm H2)≥5
  • Output voltage: Vs 2.5-4.0V(1000ppm H2)
  • Concentration slope: α ≤0.6(R1000ppm/R400ppm H2)
  • Temperature, humidity: 20±2;55%±5%RH
  • Standard test circuit: Vc:5.0V±0.1V;
  • VH: 5.0V±0.1V

 

Average rating: 4.0 based on 27 reviews
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login